Job Location: 307 OPERATIONS OFFICE - Midland, TX
Position Type: Experienced
Salary Range: Undisclosed
Description
The DOT Mechanic and Inspector Lead (Night Shift) has mastered the skills and independently performs all the duties of the Department of Transportation (DOT) Mechanic and Inspector 2; coaches, mentors, and assists with training lower-level DOT Mechanic and Inspector team; and delegates daily duties to the DOT Mechanic and Inspector Crew.
- Coach, mentor, and assist with training lower-level DOT Maintenance Mechanic and Inspectors
- Delegate daily duties to the DOT Maintenance Mechanic and Inspector crew
- Direct workers who are assembling or disassembling equipment or cleaning parts
- Ensure all company vehicles pass Federal, State, and Local inspection regulations
- Inspect vehicles and equipment for evidence of abuse, damage, or mechanical malfunction
- Verify successful repairs by performing post-repair vehicle and equipment inspections
- Prepare required reports for submittal through proper channels (i.e., investigation, inspection, repair, and Texas State Inspection (TSI) reports)
- Use diagnostic software and equipment for troubleshooting, repair guidance, and inspections
- Perform routine maintenance on equipment and vehicles (i.e., lubricate, repair, replace, or clean parts)
- Use hand tools, jacks, and cranes to adjust, maintain, or repair subassemblies
- Repair, rewire, and troubleshoot electrical systems
- Use micrometers and gauges to examine parts for damage or excessive wear
- Use electric and gas welders and soldering tools to repair broken parts and structures
- Research parts, place purchase orders, and maintain parts inventory for services and repairs
- Clean, lubricate, and perform other routine maintenance work on equipment and vehicles
- Assemble gear systems and align gears with frames
- Perform repairs on vehicles and equipment at job locations when necessary
- Perform daily yard audits for expired annual inspections
- Safely drive company vehicles over various road types, terrains, and in extreme weather
- Perform general shop housekeeping duties
- Ensure work area is free of hazardous objects and substances
- Maintain compliance with Health, Safety, and Environmental (HSE) policies by attending all required HSE training sessions, safety meetings, and always utilize proper Personal Protective Equipment (PPE)
- Other duties as assigned
Qualifications
- Minimum 2 years’ experience as a DOT Mechanic and Inspector 2 preferred
- Demonstrate mastery of the skills needed to perform the required duties of the DOT Mechanic and Inspector 2 required
- Maintaining a current valid driver’s license and clean driving record required
- Current valid CDL-A is preferred but not required
- Must be able to understand and follow written directions (i.e., manufacturer troubleshooting and repair instructions)
- Must have strong written and verbal communication skills, able to effectively interact with personnel at all levels of the organization
- Organized with a strong attention to detail
- Must be familiar with, or able to learn, safe hand tool use
- Must be self- motivated, reliable, independent, and possess a strong work ethic
- Able to safely perform required duties during a 12+ hour work shift that will include days or nights, weekends, and holidays
- Must be physically able to bend, stoop, kneel, twist, crawl, walk on uneven surfaces, and climb equipment ladders or stairs throughout the work shift
- Must be physically able work indoors or outdoors in all weather conditions including extreme heat and cold
- Must be physically able to safely lift or move 50 Lbs. without assistance
Physical Demands
The physical demands described here represent those required for an employee to successfully perform the role’s essential functions. Reasonable accommodation may be made for individuals with disabilities to perform their major responsibilities.
While performing the duties of this job, the employee is regularly required to sit, stand, or walk; use hands to manipulate, handle, or feel; reach with hands and arms; stoop or bend; and talk or hear. The employee must occasionally lift and/or move up to 50 lbs.
Work Environment
The work environment characteristics described here represent environmental conditions an employee will encounter while performing the role’s essential functions. The noise level in some work environments can be moderate and an employee may encounter extreme weather conditions while performing major duties. Reasonable accommodation may be provided for individuals with disabilities to perform their major responsibilities.
Disclaimer
The information provided in this job description indicates the general nature and level of work performed by employees within the role’s classification. This job description is not to be interpreted as a comprehensive inventory of all duties, responsibilities, qualifications required of employees assigned to this role.
The DOT Mechanic and Inspector Lead (Night Shift) has mastered the skills and independently performs all the duties of the Department of Transportation (DOT) Mechanic and Inspector 2; coaches, mentors, and assists with training lower-level DOT Mechanic and Inspector team; and delegates daily duties to the DOT Mechanic and Inspector Crew.
- Coach, mentor, and assist with training lower-level DOT Maintenance Mechanic and Inspectors
- Delegate daily duties to the DOT Maintenance Mechanic and Inspector crew
- Direct workers who are assembling or disassembling equipment or cleaning parts
- Ensure all company vehicles pass Federal, State, and Local inspection regulations
- Inspect vehicles and equipment for evidence of abuse, damage, or mechanical malfunction
- Verify successful repairs by performing post-repair vehicle and equipment inspections
- Prepare required reports for submittal through proper channels (i.e., investigation, inspection, repair, and Texas State Inspection (TSI) reports)
- Use diagnostic software and equipment for troubleshooting, repair guidance, and inspections
- Perform routine maintenance on equipment and vehicles (i.e., lubricate, repair, replace, or clean parts)
- Use hand tools, jacks, and cranes to adjust, maintain, or repair subassemblies
- Repair, rewire, and troubleshoot electrical systems
- Use micrometers and gauges to examine parts for damage or excessive wear
- Use electric and gas welders and soldering tools to repair broken parts and structures
- Research parts, place purchase orders, and maintain parts inventory for services and repairs
- Clean, lubricate, and perform other routine maintenance work on equipment and vehicles
- Assemble gear systems and align gears with frames
- Perform repairs on vehicles and equipment at job locations when necessary
- Perform daily yard audits for expired annual inspections
- Safely drive company vehicles over various road types, terrains, and in extreme weather
- Perform general shop housekeeping duties
- Ensure work area is free of hazardous objects and substances
- Maintain compliance with Health, Safety, and Environmental (HSE) policies by attending all required HSE training sessions, safety meetings, and always utilize proper Personal Protective Equipment (PPE)
- Other duties as assigned
- Minimum 2 years’ experience as a DOT Mechanic and Inspector 2 preferred
- Demonstrate mastery of the skills needed to perform the required duties of the DOT Mechanic and Inspector 2 required
- Maintaining a current valid driver’s license and clean driving record required
- Current valid CDL-A is preferred but not required
- Must be able to understand and follow written directions (i.e., manufacturer troubleshooting and repair instructions)
- Must have strong written and verbal communication skills, able to effectively interact with personnel at all levels of the organization
- Organized with a strong attention to detail
- Must be familiar with, or able to learn, safe hand tool use
- Must be self- motivated, reliable, independent, and possess a strong work ethic
- Able to safely perform required duties during a 12+ hour work shift that will include days or nights, weekends, and holidays
- Must be physically able to bend, stoop, kneel, twist, crawl, walk on uneven surfaces, and climb equipment ladders or stairs throughout the work shift
- Must be physically able work indoors or outdoors in all weather conditions including extreme heat and cold
- Must be physically able to safely lift or move 50 Lbs. without assistance
Physical Demands
The physical demands described here represent those required for an employee to successfully perform the role’s essential functions. Reasonable accommodation may be made for individuals with disabilities to perform their major responsibilities.
While performing the duties of this job, the employee is regularly required to sit, stand, or walk; use hands to manipulate, handle, or feel; reach with hands and arms; stoop or bend; and talk or hear. The employee must occasionally lift and/or move up to 50 lbs.
Work Environment
The work environment characteristics described here represent environmental conditions an employee will encounter while performing the role’s essential functions. The noise level in some work environments can be moderate and an employee may encounter extreme weather conditions while performing major duties. Reasonable accommodation may be provided for individuals with disabilities to perform their major responsibilities.
Disclaimer
The information provided in this job description indicates the general nature and level of work performed by employees within the role’s classification. This job description is not to be interpreted as a comprehensive inventory of all duties, responsibilities, qualifications required of employees assigned to this role.